• 0411 633 911
  • info@geovastonesolutions.com.au

Marble Cleaning & Polishing

Marble cleaning and polishing Sydney

Before cleaning commences, WE access interior to give way for a clear working plan so that all details are captured, and after that, cleaning is done followed by polishing. WE urge building owners and caretakers to keep clear documentation of marble degradation, and if conditions allow, instance repairs are recommended. If rock degradation has already occurred, however, there are steps which are followed in the assessment process which include identification and classification of the current exterior materials used in the construction. The systems that interact with exterior marble materials such as drainage, vapor barriers, insulation, and structural supports are evaluated too. In case the building in question has a record of features degradation, the documents should be assessed side by side with the current state of the building.

The Polishing Process

OUR process also involves inspecting of those internal components that interact with external features, and they are thus used as testing materials to allow proper recommendation of the materials to be used. OUR final step is in the process of identification of any unsafe condition that may exist in the painting and polishing process plus identification of any hazardous material that a worker may interact with. Different designs that can be used in the rehabilitation process are brought forth, the estimated budgets drown and other materials to be used collected and kept at close proximity.

The importance of marble cleaning and polishing

The entire process of marble cleaning and polishing can be seen to consume quit a lot of money but compared to the cost that the defected systems and ignored effects can bring, this cost is almost marginal. This process at times involves the removal of large pieces of the marble especially during policing of the facade where some people daut the process, but it is the only way to rectify the defect of deterioration. There need to be specialized officers at work, such professional can be found in our Geova stone solution company. Take for instance if a crack originates inside the building, there has to be extensive removal of the marble to identify the root cause.

WE use Dutchman or other punching mortars to allow the use of current paint products to furnish in the finishing. This is to seal away all the water that continue to erode the stone parts that are integrated with steel, and as we know that water is the number one stone cause of damage and should be kept off from the marble by all means. If water is not checked, it can continue to degrade the stone parts through its accumulation of rust that usually expands to the external features. Different processes cause erosion that includes damages as a result of weathering, pollution, plant growth, pile of dirt and movement of the rock all of which require that the rock is polished thoroughly and cleaned before the painting commences. Bearing the fact that marble is a byproduct of limestone and they are all components of carbon, WE offer specialist service polishing and cleaning process to result in a perfect exterior.